Use Instructions
InSpec™ N7 is designed for cleaning hard surfaces by spraying, wiping and mopping. Hold spray approximately 15cm to 20cm from the surface area. 5L versions, pour into an appropriate container for mopping. 100ml concentrate added to 2.5L of water is required for mopping. Apply to surface to ensure complete coverage.

Technical Data
InSpec™ N7 Ready to Use (RTU) is a 4% neutral detergent, pH 6.0 – 7.0. The neutral detergent has surfactant and sequestering agents designed to assist the removal of process residue and light soiling in a cleanroom environment.

Storage
Store upright in original closed containers away from sunlight and extremes of temperature. Full guidance on the handling and disposal of this product is available in the Safety Data Sheet (SDS).

Benefits

• Designed for cleaning floors, walls, ceiling and other hard surfaces for the removal of process derived residue and light soiling.
• Ideal for critical surfaces with soiling near to product manufacturing
• Very low foaming, low residue detergent with an excellent low toxicology profile
• Suitable for manual cleaning and available in convenient ready to use and concentrate formats.
• Low concentration
• All formats manufactured with WFI quality water
• Multiple bags for cleanroom transfer
• Manufactured to GMP

Safe Handling
Always wear gloves and goggles or face protection. Always read the label and SDS before use.

Material Compatibility
Application of solutions, when used as directed, will not affect materials normally encountered in the cleanroom. See compatibility information in the Technical File.

Technical User Information
InSpec™ N7 is available in sterile RTU pre-diluted formats and as a concentrate.

InSpec™ N7 is manufactured to GMP in an ISO 6 cleanroom. The product is filled and capped in an ISO class 5 environment.

RTU solutions are diluted with WFI quality water.

The solution is filtered through a 0.2 micron filter and gamma irradiated (20 – 50kGy for 5L products)  to a validated process to give a sterility assurance level SAL of 10-6.

For screw cap bottles use the entire contents after opening.