Use Instructions
InSpec™ N10 is designed for cleaning hard surfaces by spraying, wiping and mopping. Hold spray approximately 15cm to 20cm from area to be treated. For screw cap versions, pour into an appropriate container for mopping and add 100ml of concentrate per 2.4L of water. Apply to surface to ensure complete coverage.

Technical Data
InSpec™ N10 Ready to Use (RTU) is a 4% alkaline detergent, pH12. RTU -pH 12.1 to 13.4. Concentrate pH 13.7 to 14.4. The alkaline detergent has surfactant and sequestering agents designed to assist the removal of process residue and general soiling.

Storage
Store upright in original closed containers away from sunlight and extremes of temperature. Full guidance on the handling and disposal of this product is available in the Safety Data Sheet (SDS).

Benefits

• Designed for cleaning floors, walls, ceiling and other hard surfaces for the removal of general process derived residue and soiling
• The Dycem recommended cleaner of Dycem flooring
• Multiple bags for cleanroom transfer
• Manufactured to GMP
• Rapid action alkaline detergent
• Suitable for manual cleaning. Available in convenient ready to use formats
• 1L and 5L formats manufactured with WFI quality water

Safe Handling
Always wear gloves and goggles or face protection. Always read the label and SDS before use.

Material Compatibility
Application of solutions, when used as directed, will not affect materials normally encountered in the cleanroom. See compatibility information in the Technical File.

Technical User Information

InSpec™ N10 is manufactured to GMP in an ISO 6 cleanroom. The product is filled and capped in an ISO class 5 environment.

RTU solutions are diluted with WFI quality water.

The solution is filtered through a 0.2 micron filter and gamma irradiated to a validated process (at 20-50kGy for 5L products, 25-45kGy for all other formats) to give a sterility assurance level SAL of 10-6.

For screw cap bottles use the entire contents after opening.