Use Instructions
InSpec™ QT+ is designed for spraying, wiping and mopping applications. Hold spray approximately 15cm to 20cm from area to be treated. For screw cap versions, pour into an appropriate container for mopping and add 102ml concentrate per 4.9L of water. Apply to surface to ensure complete coverage.

Technical Data
Formulated Quaternary Ammonium Compound based disinfectant/cleaner. Active substance concentration, RTU formats: 0.1 – 0.2% w/w DDAC. Concentrated formats: 5-6% w/w/ DDAC. RTU pH = 10.5 to 11.5. Concentrate pH = 12.5 to 13.5.

Storage
Store upright in original closed containers away from sunlight and extremes of temperature. Full guidance on the handling and disposal of this product is available in the Safety Data Sheet (SDS).

Benefits

• An exceptional non-oxidising biocide
• Bactericidal and Fungicidal
• Low residue
• Contents protected using ‘bag-inbottle’ technology.
• 1L and 5L formats manufactured with WFI quality water
• Double bagged to enable rapid cleanroom transfer
• Ideal rotational partner for InSpec™ AN, InSpec™ HA and OX products
• Manufactured in accordance with GMP
• Active Substance compliant with Article 95 of the Biocidal Products Regulation (BPR)

Safe Handling
Always wear gloves and goggles or face protection. Always read the label and SDS before use.

Material Compatibility
Application of solutions, when used as directed, will not affect materials normally encountered in the cleanroom. See compatibility information in the Technical File.

Technical User Information
InSpec™ QT+ is a sterile disinfectant in pre-diluted and concentrated formats.

InSpec™ QT+ is manufactured in accordance with GMP and is filled and capped in an ISO class 5 environment.

The solution is filtered through a 0.2 micron filter and gamma irradiated via a validated process (at 25-45kGy) providing a sterility assurance level SAL of 10-6.

Trigger sprays supplied with 900ml solution in a 1L container.

For screw cap bottles use the entire contents after opening.